Special Products

(NATO procurement number NSN 1095-12-637-4842)
The bayonet B2K is the latest state-of-the-art development in bayonets offering the following basic functions:

• Wire-cutter for normal and concertina (hardened military) barbed wire
• Specific geometry in blade hole and on wire-cutter bolt permits only one-side fit of scabbard to knife for cutting wires. This avoids misuse and guarantees 100% right fi t for effective and quick use of wire-cutter*
• Multifunctional battle-knife & bayonet
• Screw-driver
• Special textile wearing device allows rotation of 360° of the sheath
• Sapphire re-sharpening device
• Special military coating on blade and cross guard is an additional corrosion protection
• All parts are of non-refl ective surface and colour
• Handle grip is ergonomical and may also be used with gloves
• The knife is electrically insulated up to 1.000 Volts (provided the user follows instructions as to use in dry and non-oily conditions)

The B2K may be used for example for cutting wires (also hardened concertina barbed-wire), breaking windows, construction of cover/ shelter and as a general survival tool.
The blade of the B2K bayonet is made from stainless steel which is hardened to ca. HRC 52 keeping the blade fl exible, easy to sharpen (easy, fast and effi cient maintenenace) and very corrosion resistant. The B2K is resistant to temperatures from -40°C to +80°C.

• Developed for special operation teams
• Protection against armour piercing API long rifle ammunition
  - 7,62x51 VMS/HK – 820 +/- 10 m/s
  - 308 Winchester VMS/HK – 830 +/- 10 m/s
• High performance ceramic/composite
• Large protection area
• Vision block with the same protection level

Height: approx. 130 cm

Width: approx. 60 cm

Weight: approx. 55 kg

Protection Level: German SK 4 and American NIJ-4

• Developed for different operations
• Protection against long rifle ammunition
  - 7,62x51 Nato FMJ – 838 m/s
• Rotating handle
• Large protection area
• Removable periscope

Height: approx. 95 cm

Width: approx. 55 cm

Weight: approx. 19 kg

Protection Level: American NIJ-3

• 3 times more light output compared to Halogen
• Much whiter and more natural light colour
• 1,5 hours operation per charge
• Secondary lower level light using the powerful
  Luxeon 3 Watt Star
• Operation for 5 hours per charge
• Ni-MH Nickel Metal Hydride Battery Pack

Outside material: High-performance aircraft aluminium, splash water protected
LED: 1,25 Watt powered up to 3 Watt / lifetime 50.000 hours
Colour: black
Luminous flux: 83 lumen
Batteries: 3X AAA LR03 1,5V
Battery lifetime: 25-50 hours
Length: 130 mm
Calibre: head: 32mm / fl agpole 25mm
Weight: 144 gram
Waterproof: yes
Package: batteries / holster / loop / carabiner

Current: Original paralysers use 1.2mA.

Voltage: As a principle rule, the higher the voltage the better clothes are penetrated.

Frequency: Thanks to proper balancing of frequency, original paralysers pose no health risks.

Cascade circuit: Given voltage is guaranteed, no voltage drop under permanent use.

Ignition capacity: Number of ignitions with the same battery. Usually more than 5000 ignitions.

Product liability: Mandatory in the EU since 1988. Most foreign manufacturers do not meet this requirement.

ABS: Highly impact-resistant plastics, weather-proof and lightfast.

Contact pins: Located at the front end of the paralyser, used for voltage transfer.

Protective cap: Protects contact pins from damages due to mechanical impact, and allows for quick discharge after use.

100% Polypropylene, high impact toughness

Length: 500, 550, 600 mm

Weight: 300-400 g depending on the length

Grip length: 110 mm

TONFA consists of two parts

• Handle with a knob
• Perpendicular to the handle

The SC900 is a simple to operate microprocessor based digitally controlled, pulse induction walk through metal detector using VLF Technology. The electronics is microprocessor based and digitally controlled to provide a sensitive metal detection and discrimination.

Weight: approx. 52 kg
Gross weight: approx. 65 kg
Voltage: approx. 70VAC to 270VAVC / 50Hz to 60Hz
Power consumption: ca. 10W standby mode - 20W in alarm mode
Packages dimension (B x H x L):
Box 1: approx. 560 x 260 x 2260 mm
Box 2: approx. 220 x 210 x 1050 mm
Operration temperature: approx. -20°C to +70°C

Certifications: EN 347 O3 HRO HI CI WR

Upper: full-grain leather with waterrepellent treatment; rear flap for maximum comfort

Lining: GORE-TEX®

Midsole: new innovative laminate textile anti-perforation midsole

Sole: injected shock-absorbent PU with an antistatic oil and petrol resistant rubber tread surface; non-slip, wear and heat resistant

Toe: reinforced by heat-moulded material

Closure: fast lace system with new hooks

Sizes: 4 – 12 (UK Sizes)